Post by account_disabled on Feb 27, 2024 9:55:26 GMT 1
Even though it is not a vital item for safe driving , knowing the damping system in the trunk is essential to avoid unnecessary headaches, literally — are you going to say that you have never hit your head on the trunk lid of your car? Read our post and see how easy it is to keep this system working well! Also learn how to identify problems and how to make the change. See too: > Ultimate seat belt manual: everything you need to know > Beyond spare parts: what to consider when buying a car? > New driver's license: understand how the digital driver's license works Understand what it is for and how it works The trunk lid damper — or gas spring — is a component responsible for helping to open and support the lid, avoiding major impacts. It also works as a type of movement limiter, preventing wear and tear on the hinges. Its shape is similar to that found in the vehicle's suspension system, however, it normally has smaller diameters and longer lengths. This shock absorber model uses nitrogen gas injected under pressure, which guarantees a smoother and more constant movement. When you open the trunk lid, the nitrogen pushes a metal rod attached to it, which makes it easier to open — so you don't have to use as much force.
When releasing the lid, the nitrogen maintains this force and prevents the lid from closing by itself. When you force it down, you compress the nitrogen again, bringing the metal rod back to its starting position. Know how to identify signs of Chinese Singapore Phone Number List wear Over time, the damping system in the trunk begins to lose performance, causing some signs that can be easily identified by following some very simple procedures. First, open the lid and see if you can do this with little effort. When reaching maximum opening, check that there has not been an exaggerated impact on the hinges. Too much pressure can cause this behavior — mainly caused by an inadequate or incorrectly installed component. Release the lid and see if it stays up, even without your help. If the position is not maintained, the gas spring has a problem and must be replaced — especially if there is no support. Although it does not cause serious risks to your safety, the failure of this component can end up causing the lock to wear out and break, as it will no longer absorb the impacts generated when closing the lid. Another interesting test is to open the trunk lid only halfway and check if it will close on its own. If this happens, it means that the shock absorber is starting to lose efficiency.
If the component is new and has recently been replaced, check that the model used is correct. It is also important to pay attention to noises and small crashes. Install a good cushioning system in the trunk If you have identified one of the signs presented in the previous topic, the damping system in the trunk must be replaced. In this case, avoid the gambiarras; they can cause more damage than solve the problem. If the trunk lock breaks due to wear and tear on the damping system, you will have to pay more than R$50.00 to replace this part — if it is electric, the cost will easily exceed R$100.00. Pay close attention to the components you put in your car. Do not use unknown brands or used parts. Look for reliable suppliers who are references in the automotive world. The damping system in the trunk has a very low maintenance cost and it is not worth using lower quality parts . Nakata — an auto parts manufacturer with more than 60 years of experience and a reference in the automotive sector — has a wide range of gas springs for trunks that are excellent value for money. They are extremely resistant and durable, as they are manufactured with the best materials and undergo rigorous quality control tests.
When releasing the lid, the nitrogen maintains this force and prevents the lid from closing by itself. When you force it down, you compress the nitrogen again, bringing the metal rod back to its starting position. Know how to identify signs of Chinese Singapore Phone Number List wear Over time, the damping system in the trunk begins to lose performance, causing some signs that can be easily identified by following some very simple procedures. First, open the lid and see if you can do this with little effort. When reaching maximum opening, check that there has not been an exaggerated impact on the hinges. Too much pressure can cause this behavior — mainly caused by an inadequate or incorrectly installed component. Release the lid and see if it stays up, even without your help. If the position is not maintained, the gas spring has a problem and must be replaced — especially if there is no support. Although it does not cause serious risks to your safety, the failure of this component can end up causing the lock to wear out and break, as it will no longer absorb the impacts generated when closing the lid. Another interesting test is to open the trunk lid only halfway and check if it will close on its own. If this happens, it means that the shock absorber is starting to lose efficiency.
If the component is new and has recently been replaced, check that the model used is correct. It is also important to pay attention to noises and small crashes. Install a good cushioning system in the trunk If you have identified one of the signs presented in the previous topic, the damping system in the trunk must be replaced. In this case, avoid the gambiarras; they can cause more damage than solve the problem. If the trunk lock breaks due to wear and tear on the damping system, you will have to pay more than R$50.00 to replace this part — if it is electric, the cost will easily exceed R$100.00. Pay close attention to the components you put in your car. Do not use unknown brands or used parts. Look for reliable suppliers who are references in the automotive world. The damping system in the trunk has a very low maintenance cost and it is not worth using lower quality parts . Nakata — an auto parts manufacturer with more than 60 years of experience and a reference in the automotive sector — has a wide range of gas springs for trunks that are excellent value for money. They are extremely resistant and durable, as they are manufactured with the best materials and undergo rigorous quality control tests.
